|
100 Light Grey |
|
|
500 Colonial Green |
|
|
420 Caramel |
|
|
210 White Sand |
|
|
400 Mocha |
|
|
300 Taupe |
|
|
200 Sand |
|
|
175 Charcoal |
|
|
150 Dark Grey |
|
|
115 GEM Grey |
|
|
600 Slate Blue |
|
|
800 Old Gold |
|
|
900 Brick Red |
|
|
700 Deep Blue |
|
|
575 Ivy |
|
|
Cole Diamond Flooring, Inc. provides this web-based color guide for preliminary color
selection only. Please refer to either a physical sample or our physical color card prior to making a final choice. Call Cole Diamond Flooring, Inc. at (443) 480-1172. Colors shown here may not represent actual color
of material due to variations in monitor or printer capabilities.
When selecting the Color for your application,
please take time to carefully consider:
APPEARANCE Light colors generally provide a brighter,
airier environment than dark colors.
GLOSS Normally, the higher the gloss, the more intense
the color.
ABRASION Abrasion is more visible on a dark floor than on a light one, and on
hard surfaces as opposed to those with greater elasticity. Consult your Representative to determine the correct topcoat you
need to offset the abrasion you expect.
TRAFFIC & MAINTENANCE Wheel marks and dirt naturally
show up more on pale colors than on other choices.
LIGHT Generally, the darker the room,
the lighter you may want the floor.
SPILLAGE What might be most commonly spilled on the floor?
What color will most obscure it? Also, consult your Representative to determine the degree of chemical resistance you may
require prior to selection.
BATCH VARIATIONS BE SURE TO ORDER ENOUGH! Variations in resins,
pigments, and other raw materials cause slight variations in finished product from batch to batch. While colors are matched
as closely as possible, the manufacturer cannot guarantee that each new batch of coating will precisely match its predecessor.
CUSTOMIZED COLORS Cole Diamond Flooring, Inc. will customize
colors to the client's specifications. Wet or dry samples will be provided for prior approval. Minimum orders and a premium
charge may be required. All customized colors must be approved and may not be returned. An additional ten (10) working days
may be required to match and produce customized colors.
Colors may vary slightly from resin to resin or texture
of coating. All colors may not be available in every product. Some standard Colors are available in both satin and gloss.
Exact intensity of gloss is determined by the system or resins used. Please refer to the color data above for detailed color
selection guidelines.
|